For the clock to function, you must leave the TV in standby mode after setting the clock in the TV menu. The TV must not be switched off using the power button. Once the TV is switched off, the clock will be reset. If there is a mains interruption when the TV is in standby mode, the clock will also be reset. The information on this page applies
The “Audio Output” setting can only be changed if you are using a HDMI cable to your TV. These settings are only used when the HDMI is connected. More information about those settings can be found in the user manual on page 19. If you are using a standard yellow video cable then the “Audio Output” options will be grayed and not available to change. This is normal and if
Page 7: Antenna Cable. Antenna Cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals.It is necessary to complete the initial setup regardless of the type of connection you are using. The initial setup allows you to make a setup of your personal image setting preferences by means of some predefined test pictures. If you are using a coaxial connection from the Cable or Satellite box to the TV: Only one TV channel specified by the service provider will be stored Change the
How to turn pixel plus demo mode on/off. Press the [Pixel plus] button on the remote to activate the demo. The TV screen is divided into two parts. In the left part pixel plus is turned off, in the right part these options are turned on. Press the [Pixel plus] button on the remote again to switch the demo off.
Try and avoid having low energy lighting in close proximity to the television set, as this may react with the 3D sensor on the Glasses. Best results are obtained when the room has subdued lighting. Set the Contrast to a level of approximately 85, Brightness 45-50, Colour to 50-55, sharpness 5-7. Make sure that the “device” e.g. Blu Ray Player has been added via the “Add Devices” option JoDvb.
